How to Whip a Line End
By Tom Lochhaas, About.com Guide
Continue pulling the twine (from the right) as you watch the loop being pulled along beneath the wrappings. Pull until you see it about halfway through the coil of wrappings.
Previous
Next
- Anchor the End of the Whipping Twine
- Form a Loop in the Whipping Twine
- Begin the First Wrap Around the Line
- Start the Second Wrap
- Continue Wrapping the Whipping Twine
- Complete the Last Wrap
- Cut the Twine and Bring the End Through the Loop
- Pull the Whipping Twine Tight
- Pull the Loop Under the Wrappings
- Trim the Twine and Line End
Explore Sailing
- About.com
- Sports
- Sailing
- Boat Maintenance & Repair
- How to Whip a Line End
Also from About.com:
©2013 About.com. All rights reserved.